Filamento PLA+ Tough Pro AF negro ónix de 1,75 mm ¡Fabricado en EE. UU.!
Filamento PLA+ Tough Pro AF negro ónix de 1,75 mm ¡Fabricado en EE. UU.!
No se pudo cargar la disponibilidad de retiro
Presentamos nuestro nuevo PLA+ TOUGH Pro. Un PLA resistente de calidad de ingeniería que puede soportar fuertes impactos y altas temperaturas. Directamente desde la placa de construcción, nuestro PLA+ Tough Pro le brinda una resistencia al impacto 8,8 veces mayor que un PLA estándar.
Nuestro Tough Pro PLA+ utiliza resina virgen NatureWorks Ingeo 3D870, que fue diseñada para brindar propiedades térmicas y mecánicas similares al ABS en un paquete de PLA ecológico.
Este grado de PLA se puede recocer después de la impresión para cristalizar aún más el material, mejorando aún más sus propiedades térmicas y mecánicas.
Haga clic aquí para ver nuestra guía sobre cómo recocer sus piezas.
Nuestro Tough Pro PLA+ es un material verdaderamente resistente, diseñado para los trabajos más difíciles. Fabricado con resina PLA Ingeo 3D870 diseñada y fabricada aquí mismo en los EE. UU.; después del recocido, tiene una resistencia al impacto comparable al ABS y una resistencia a la temperatura comparable al PETG, todo en un paquete de PLA de base biológica con las mismas excelentes características de impresión 3D del PLA.
Cada carrete contiene 1 kg (2,2 libras) de filamento, con un diámetro de 1,75 mm y una precisión dimensional de +/- 0,05 mm.
Dimensiones del carrete (ahora compatible con las unidades AMS de Bambu Labs):
- Diámetro interior (ID) = 52 mm
- Diámetro exterior (OD) = 200 mm
- Ancho (An) = 67 mm
- Peso = 200 - 220 g
Recomendamos una temperatura de boquilla de 205-220 °C y una temperatura de lecho de 45-60 °C.
Anteriormente, Onyx Black se llamaba Matte Black. Si recibes un carrete con Matte Black en la etiqueta, ¡es el color correcto!
Descargas:
Print Settings
Print Settings
- Nozzle Temperature: 240 - 270°C
- Bed Temperature: 70 - 100°C
- Speed: 60 - 300 mm/s
Nozzle temperature can vary between 240-270°C depending on desired layer to layer adhesion vs part print quality. Higher nozzle temperatures will result in stronger parts, but may cause lower quality and/or increased stringing.
Part cooling can also vary depending on desired layer to layer adhesion vs part print quality. More cooling will result in better overhangs & bridging, but will decrease the ultimate layer to layer adhesion.
DO NOT DRY AT TEMPERATURES OVER 60°C.
1kg Spool Dimensions (AMS-Compatible)
1kg Spool Dimensions (AMS-Compatible)
- Filament Weight = 1 kg
- Filament Diameter = 1.75 mm (+/- 0.05 mm)
- Spool Inner Diameter (ID) = 52 mm
- Spool Outer Diameter (OD) = 200 mm
- Spool Width (W) = 67 mm
- Spool Weight = 220 g
Share







Overall, it’s great. It’s a little stringy at times, but it could be user error. As for the final print results, I have no complaints. Sturdy and flexible.
Arrived very quickly (faster than Amazon sans Prime) and just as described. Have yet to attempt a print with it as my hot end has decided not to hot end. I’ll try to update once the issue is resolved and attempts have been made.
This is my first non-PLA filament. Learning more every print. Getting good results!
Great material! Soft, somewhat flexible, prints well. Thanks so much! And, no smell when I printed it.
I can't say enough good about American Filament and their PCTG. The store is local and their filament is beyond compair.
- 5 stars: 12 (86%)
- 4 stars: 2 (14%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
It prints well and it has a nice finish. I like it for my outdoor projects I make.
Overall, it’s great. It’s a little stringy at times, but it could be user error. As for the final print results, I have no complaints. Sturdy and flexible.
Arrived very quickly (faster than Amazon sans Prime) and just as described. Have yet to attempt a print with it as my hot end has decided not to hot end. I’ll try to update once the issue is resolved and attempts have been made.
This is my first non-PLA filament. Learning more every print. Getting good results!
Great material! Soft, somewhat flexible, prints well. Thanks so much! And, no smell when I printed it.
I can't say enough good about American Filament and their PCTG. The store is local and their filament is beyond compair.
Any filament that I get from a American filament has not disappointed me at all. Always high-quality and the information is directly on point.
PCTG is really easy to print with. In the past I have struggled with shrinkage and warping while printing with ASA or PETG . This has not been the case with PCTG, so used the AF profile that is available for Bambu printers and no problems.
Prints beautifully on my PRUSA core one using another brands profile.
Easy to print. Strong parts.
The PCTG is great stuff. I will be transitioning to mor of this in the inventory, moving away from PLA for the majority of my prints going forward.
I wish it was packed in a box. I store all my filaments in boxes with a label on the top so I can tell what it is.
Are the reels recyclable? There seems to be no marking so they are not??
I wish there were more holes along the edge of the reel to hold the end of the spool. Pairs about 30cm apart would be perfect.
The filament is great.
Bob, I apologize that you were not fully satisfied with the packaging of our product! Unfortunately, the cost of adding an additional box & the increased cost from a larger shipping box would make the product several dollars more expensive per 1kg spool & most customers would not be willing to pay for that. The spools are not recycleable by a 'normal' municipal recycling facility, I believe they are a type 7 plastic. We purchase our spools from a mass spool manufacturer in order to keep costs low, so we do not have direct control over the hole layout.
I love how quickly it shipped. Haven’t used it yet but will do eventually.