Filamento PLA+ AF rosa neón de 1,75 mm ¡Fabricado en EE. UU.!
Filamento PLA+ AF rosa neón de 1,75 mm ¡Fabricado en EE. UU.!
No se pudo cargar la disponibilidad de retiro
Presentamos nuestro filamento AF PLA+ para impresora 3D en color rosa neón: una opción increíble para los aficionados a la impresión 3D de cualquier nivel y fabricado con orgullo en EE. UU. Este filamento es un testimonio de lo mejor de la fabricación estadounidense, ya que combina materiales de calidad superior con procesos tecnológicos avanzados.
¿El tono? Un rosa neón llamativo, como el color vivo de un iluminador rosa intenso. Es perfecto para impresiones que quieren destacarse con audacia y un toque de diversión. De hecho, este es el mejor PLA rosa de Barbie que encontrarás 😜 ¡Y también es fluorescente!
Pero no se trata solo del color. Lo que hace que este filamento sea especial es su composición "PLA+". Nuestro PLA+ AF rosa neón no es un PLA estándar; presenta una mayor dureza y resistencia a la temperatura. Esto lo hace ideal para proyectos que necesitan un poco más de robustez y longevidad, superando fácilmente a los filamentos regulares en situaciones más difíciles.
Cada carrete contiene 1 kg (2,2 libras) de este filamento duradero, medido con precisión a un diámetro de 1,75 mm y manteniendo una precisión dimensional de +/- 0,05 mm.
Dimensiones del carrete (ahora compatible con las unidades AMS de Bambu Labs):
- Diámetro interior (ID) = 52 mm
- Diámetro exterior (OD) = 200 mm
- Ancho (An) = 67 mm
- Peso = 220 g
Para una impresión óptima, recomendamos una temperatura de la boquilla de 205-220 °C y una temperatura de la cama de 50-70 °C.
¿Estás listo para inyectarle energía vívida y divertida a tus proyectos de impresión 3D? Nuestro filamento AF PLA+ rosa neón está aquí para brindar robustez, resistencia y un toque de diversión vibrante a tus creaciones. ¡Comencemos a imprimir y hagamos algo extraordinariamente duradero y visualmente emocionante!
Print Settings
Print Settings
- Nozzle Temperature: 205 - 220°C
- Bed Temperature: 45 - 60°C
1kg Spool Dimensions (AMS-Compatible)
1kg Spool Dimensions (AMS-Compatible)
- Filament Weight = 1 kg
- Filament Diameter = 1.75 mm (+/- 0.05 mm)
- Spool Inner Diameter (ID) = 52 mm
- Spool Outer Diameter (OD) = 200 mm
- Spool Width (W) = 67 mm
- Spool Weight = 220 g
Share
My only complaint is that they don't have more colors! If they had more, I would buy exclusively from AF. Had to get marble and pastel colors elsewhere.
New to 3d printing so it was nice to have a filament that worked right out of the bag. Plus I love that it’s made locally.
This is the best and brightest pink filament that I have purchased, no contest. It's super bright and stands out. I print clips for my job so that workers are able to see the last location they were in and the pink sticks out wonderfully. The clips are held together with rubber bands and unless someone is being too forceful, the PLA can withstand the forces from everyday use. The pink clips are always a hit at work and is a preferred color among my coworkers, everybody loves them.
Never had any issues with bed adhesion, stringing, burning, or dialing in any settings. I just used my regular PLA profile and never had any issues with layer adhesion either. It honestly prints like a dream. The filament does have a dry feeling and does tend to snap if you're trying to straighten it to push it into a direct drive setup but once you get used to it it's a non-issue, you just gotta be a little more careful than with other filaments. This isn't an issue that's just with this color as I have also used their teal PLA+ and it does the same thing.
My only issue and what prevents me from buying this filament, or any filaments from AF more often is the plastic spools. I try to do my best to avoid using any filament that doesn't have a cardboard spool to help limit my waste. I can go through this filament pretty quickly so that's a lot of waste on my end. If AF had spool refills or used cardboard I'd be all over it. I haven't been able to find a pink that is as vibrant as AFs so I hope they give the option of cardboard or master refills in the future.
For the quality and ease of printing the price is definitely worth it! And supporting an American company is tops too.