Filamento PLA+ Tough Pro AF negro ónix de 1,75 mm ¡Fabricado en EE. UU.!

$29.99 USD

~~$39.99 USD~~ $29.99 USD

Oferta Agotado

Los gastos de envío se calculan en la pantalla de pago.

Cantidad

Size 1kg - AMS Compatible Spool 50g - Sample Coil (LIMIT 4)

Presentamos nuestro nuevo PLA+ TOUGH Pro. Un PLA resistente de calidad de ingeniería que puede soportar fuertes impactos y altas temperaturas. Directamente desde la placa de construcción, nuestro PLA+ Tough Pro le brinda una resistencia al impacto 8,8 veces mayor que un PLA estándar.

Nuestro Tough Pro PLA+ utiliza resina virgen NatureWorks Ingeo 3D870, que fue diseñada para brindar propiedades térmicas y mecánicas similares al ABS en un paquete de PLA ecológico.

Este grado de PLA se puede recocer después de la impresión para cristalizar aún más el material, mejorando aún más sus propiedades térmicas y mecánicas.

Haga clic aquí para ver nuestra guía sobre cómo recocer sus piezas.

Nuestro Tough Pro PLA+ es un material verdaderamente resistente, diseñado para los trabajos más difíciles. Fabricado con resina PLA Ingeo 3D870 diseñada y fabricada aquí mismo en los EE. UU.; después del recocido, tiene una resistencia al impacto comparable al ABS y una resistencia a la temperatura comparable al PETG, todo en un paquete de PLA de base biológica con las mismas excelentes características de impresión 3D del PLA.

Cada carrete contiene 1 kg (2,2 libras) de filamento, con un diámetro de 1,75 mm y una precisión dimensional de +/- 0,05 mm.

Dimensiones del carrete (ahora compatible con las unidades AMS de Bambu Labs):

Diámetro interior (ID) = 52 mm
Diámetro exterior (OD) = 200 mm
Ancho (An) = 67 mm
Peso = 200 - 220 g

Recomendamos una temperatura de boquilla de 205-220 °C y una temperatura de lecho de 45-60 °C.

Anteriormente, Onyx Black se llamaba Matte Black. Si recibes un carrete con Matte Black en la etiqueta, ¡es el color correcto!

Descargas:

Tough Pro PLA+ Ficha técnica

Hoja de datos de seguridad del PLA+ Tough Pro

Print Settings

Nozzle Temperature: 240 - 270°C
Bed Temperature: 70 - 100°C
Speed: 60 - 300 mm/s

Nozzle temperature can vary between 240-270°C depending on desired layer to layer adhesion vs part print quality. Higher nozzle temperatures will result in stronger parts, but may cause lower quality and/or increased stringing.

Part cooling can also vary depending on desired layer to layer adhesion vs part print quality. More cooling will result in better overhangs & bridging, but will decrease the ultimate layer to layer adhesion.

For Bambu Printers: We recommend using the Bambu Labs Gold Textured PEI build plate, or other aftermarket textured PEI build plates, for this material. 70°C should be sufficient for adequate build plate adhesion, going higher than this temperature may cause parts to adhere to the plate too well.

For Bambu Printers: recommended retraction length can vary between 0.8-1.2mm depending on the amount of stringing you experience. For other printers: the default retraction settings for PETG should be sufficient, but total retraction length may need to be increased slightly.

For Bambu Printers: It is recommended to lower your Top Surface print speed to 100-150 mm/s for higher top layer quality.

1kg Spool Dimensions (AMS-Compatible)

Filament Weight = 1 kg
Filament Diameter = 1.75 mm (+/- 0.05 mm)
Spool Inner Diameter (ID) = 52 mm
Spool Outer Diameter (OD) = 200 mm
Spool Width (W) = 67 mm
Spool Weight = 220 g

Ver todos los detalles

Worked flawlessly straight out of the bag!

I was so excited to try this out I didnt even put it in the dryer before loading it into my AMS. The Bambu labs filament profile you provide on your website was a huge help and a success, Printed a quick benchy to test and it printed flawlessly on the first try. Can't wait to start the next project with it.

Troy, thank you for taking the time to leave a review, we appreciate it! Just FYI, it is not necessary to dry our materials straight out of the bag; they come delivered to you dry & ready to use!

Beautiful prints

This was the first PCTG filament that I have used and I have been impressed with the results thus far. I am mainly interested in using it for functional prints but due to the way it catches the light I used it to print a decorative print as a gift and it turned out beautifully. After seeing the results I have my eye on the red version for the next order I place.

That is beautiful! Thank you for sharing!

Works good

Filament was tightly vacuum sealed and worked perfectly on the first try. I did put it in my filament dryer for a few minutes but the display indicated it was already at or below 15% humidity so I just printed with it as is. I used a filament profile from a competitor and had good results.